MOTOTRBO™ SLR 1000 Repeater

RM18,684.00

Keeping your team connected requires uninterrupted radio coverage. Using the SLR 1000 repeater, you can easily extend the range of your network through dead zones and across remote locations, so everyone’s within reach. Deploy the SLR 1000 indoors or out—it’s IP65-rated for dust and water protection. The compact size gives you more installation options. And a low power, fanless design uses less space and energy.

Share with your friend
Product price
Additional options total:
Order total:
FeaturesSpecification
    • Protected For Your Environment

Improve your coverage in the way that works best for you. With an IP65 rating for water and dust protection along with a fanless design, you can deploy indoors or out without worry.

    • Cost-effective Coverage

Increasing your coverage doesn’t have to mean increasing your cost of ownership. The SLR 1000 features a low power, fanless, space-saving design that reduces energy and potential installation costs.

    • Deploy In More Places

Easily mount the SLR 1000 on walls or poles, and take advantage of additional locations to improve coverage. And its compact, fanless design means fewer HVAC planning headaches—with more deployment options.

    • Grows With You

The SLR 1000 works with both conventional and trunking systems that support voice and data, so you can continue to use it as you expand your network. For conventional systems, deploy the SLR 1000 with Extended Range Direct Mode, and expand your range without having to purchase additional frequencies.

General Specifications
UHF
Frequency Range 400-512 MHz
Channel Spacing 25 / 12.5 kHz
Frequency Stability 0.5 ppm
Frequency Generation Synthesized
Channel Capacity 64
RF Output Power 1-10 W
Dimensions (H x W x D) 11 x 9 x 4 in (279.4 x 228.6 x 101.6 mm)*
Weight 10 lbs (4.54 kg)
Input Voltage (DC) 12 V (11.0-15.5 V)
Current (standby 0.7 A (0.63 A typical)
Current (transmitting at 10 W) 3A (typical)
Input Power Modes DC only, Optional AC/DC Power Supply Available
Operating Temperature Range -22 to +140 °F (-30 to +60 °C)
Ingress Rating IP65
Max Duty Cycle 100%
Digital Vocoder Type AMBE+2™
Connectivity, right side Rx (N female)
Connectivity, left side Tx (N female)
Connectivity, bottom USB B Receptacle, 1x Ethernet, RJ45 Accessory Connector,
DC Input
Modes of Operation Half Duplex / Duplex
Supported System Types Digital Conventional, IP Site Connect, Capacity Plus,
Capacity Max, Connect Plus
Analog Conventional, Digital Voting, MPT 1327
Audio Levels Input: Unbalanced: Adjustable, 80 mV rms nominal for 60% RSD.
Output: Unbalanced: Adjustable, 330 mV rms nominal @ 60% RSD
FCC Emission Designators 11K0F3E, 16K0F3E, 7K60FXD, 7K60F7D, 7K60FXE, 7K60F7E,
7K60F7W, 7K60FXW
FCC Type Acceptance ABZ99FT4100
IC Description 109AB-99FT4100
Receiver
UHF
Frequency Range 400-527 MHz
Sensitivity, 12dB SINAD 0.3 uV (0.22 uV typical)
Sensitivity, 5% BER 0.25 uV (0.18 uV typical)
Selectivity (TIA603D), 25* / 12.5 kHz 75 / 50 dB
Selectivity (TIA603), 25* / 12.5 kHz 75 / 65 dB
Intermodulation Rejection (TIA603D/ETSI) 80 / 70 dB (82 / 73 dB typical)
Spurious Rejection (TIA603D/ETSI) 85 / 75 dB (95 / 90 dB typical)
Audio Distortion < 3% (<1% typical)
Hum and Noise, 25* / 12.5 kHz -50 / -45 dB
Blocking -57 dBm
Transmitter
UHF
Frequency Range 400-527 MHz
RF Output Power 1-10 W
Max Duty Cycle 100%
Intermodulation Attenuation 40 dB
Adjacent Channel Power (TIA603D), 25*/ 12.5 kHz 78 / 62 dB
Adjacent Channel Power (ETSI), 25* / 12.5 kHz 78 / 62 dB
Modulation Fidelity 4FSK FSK Error 5%
FSK Magnitude 1%
Conducted Spurious Emissions -36 dBm < 1 GHz, -30 dBm > 1 GHz
Audio Response TIA603D / ETSI
Audio Distortion &lt;1%
Hum and Noise, 25*/ 12.5 kHz 50 / -45 dB
Rated System Deviation, 25* /12.5 kHz ±5.0 / ±2.5 kHz